Invertec News
Inverter Technology Asia acheive ISO14001 Environmental Certification
Invertec are pleased to announce that their Far Eastern factory in Malaysia (Inverter Technology Asia ltd) has achieved the world wide recognised environmental standard ISO14001certification in addition to their ISO9001certification. ITA worked with an external consultant and hired a new Quality Assurance engineer to achieve the certification in only 6 months. Well done to the team at ITA.
Invertec Exhibit at Trako in Poland
Invertec will be exhibiting at Trako Rail Exhibition in Poland 2011. We would be pleased to welcome you to our stand, where you will be able to see new developments in our LED lighting as we approach 1000 vehicles that we have supplied with LED main saloon lighting. We will also be exhibiting our rail interior products that we have supplied to many Rail customers. The show takes place from the 11-14 October, held at the The Gdańsk International Fair Co in Poland
Invertec Exhibit at Rail Interiors in Cologne
Invertec will be exhibiting at Rail Interiors Exhibition in Cologne 2011. We would be pleased to welcome you to our stand, where you will be able to see new developments in our LED lighting as we approach 1000 vehicles that we have supplied with LED main saloon lighting. We will also be exhibiting our rail interior products that we have supplied to many Rail customers.
Invertec Delivers complete ceiling system to Viseon Trolley Bus
Invertec Have delivered a complete ceiling system to Viseon Bus in Pilsting for their new LT20 low floor Trolley bus. Designed in 3D CAD from data received from Viseon, the whole ceiling from window to window was delivered as a complete kit including air
conditioning ducts and centre ceilings in high pressure laminate, with high quality loud speakers and LED dimmable lighting. Viseon launched the new bus at the thier factory in Pilsting to the press, which was well received.Invertec also supply the complete ceiling and lighting for the LDD double deck bus and CL mini LED lights for the luggage lockers on C10 and C13 Coaches manufactured in Pilsting .
NEW! Invertec launch new low profile surface mount LED light
Invertec have launched 2 new surface mounted low profile LED lights, Razor and Edge. These lights available in various lengths up to 2.7m long utilise the same base but with different diffusers and end caps. Available in either 12 or 24v, and considerably smaller than light fittings with tubes, these very bright light units have cool white LED's with the LED driver integrated on the LED strip to avoid shadows on the diffuser. for more information request a data sheet or see www.invertec.co.uk/razorandedge.html
Invertec Exhibit at Busworld 2011
Invertec will once again be exhibiting at Busworld Kortijk 2011. We would be pleased to welcome you to our stand, where you will be able to see new developments in our LED lighting as we approach 1000 vehicles that we have supplied with LED main saloon lighting, as well as sections of 2 complete production ceilings that we have supplied in 2011, and some innovations in RGB LED applications. Please take the time to visit us on stand R20.
Invertec Supplied CL-mini to Wildlife education trust
Invertec have supplied 2 CL mini LED lights to Chipembele Wildlife education trust in Zambia for their Pizgauer 4x4 vehicle, one for the cab and one for the load area. These robust compact LED lights provide excellent illumination for such a rugged vehicle. Steve Tolan was very pleased with the lights saying " , “I have now fitted the CL-Minis you kindly donated to us, and I am just so pleased with them. The vehicle is also used by me for expeditions, and I carry a large amount of equipment in the back. Having good lighting in the cab, and the windowless storage area behind is vital, and the CL-Minis far exceeded my expectation of them in terms of their light output and coverage. It's almost like daylight inside when they are switched on after dark now!”
Invertec Delivers complete ceiling system to Viseon Double Deck
Invertec Have delivered a complete ceiling system to Viseon Bus in Pilsting for their new LDD low floor double deck bus. Designed in 3D CAD from data recieved from Viseon, the whole ceiling from window to window was delivered as a complete kit including air
conditioning ducts and centre ceilings covered ina soft touch foil, with high quality loud speakers and LED dimmable lighting. Viseon launched the new bus at the IAA in Hannover to much acclaim, the ceiling and lighting were well received by customers. Invertec already supply CL mini LED lights for the luggage lockers on C10 and C13 Coaches manufactured in Pilsting by Viseon.
Invertec Launches New Spot Lamp
Invertec have launched a new LED spot light, flush fitting with a low profile, requiring only 15mm of space from the face of the panel it is fitted to, this high power LED spot lamp compliments our HAL LED down light range. A Plastic injection moulded housing, allowing for a lower cost alternative. Supplied with removable retention springs and integral retention, this light can be fitted to panels from 1 to 15mm thick. For more details on our DLF14LED Click here
Invertec Wins Large CL10R order
Invertec have won a large order for CL10R via our German Partners to supply more than 1000 parcel delivery vehicles for a German Parcel delivery service. Requiring high light levels and reliability The CL10R was specified, and hooked up to a motion sensor to act as a switch. The lights come on instantaneously when the driver enters the load area and switch themselves off after 3 minutes when it detects no further motion. For more details on our CL10R Click here
NEW! High Power LED Worklight
Invertec Launch their new High Power LED Work and scene light. 12 high power LED's provide excellent illumination for work situations and emergency scene lighting, from 10-30v and only 18 watts this high power LED lamp can be powered from the vehicle or boat electrical system or from an independent power supply.
EU Directive spells end for Halo-phosphour Tubes
In a drive to reduce Carbon Emissions on a pan European level, The European Commission has put into effect new directives to phase out energy inefficient lamps.
These directives cover all lighting areas, including T8 Halophosphor lamps with effect on April 13th 2010.
Commission Regulation (EC) No 245/2009 with regards to Eco Design requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaries able to operate such lamps requires fluorescent lamps to meet specific performance criteria including lumens/Watt, lumen maintenance, power factor and colour rendering.
Based on the above requirements our current standard (15/18/30/36/58Watt) T8 Halophosphor tubes fail to meet the requirements.
This means that manufacture of this category of lamp will cease on 13 April 2010, and supply will diminish as any existing stocks are depleted. Full Story ...
A New Strategic Partnership
Invertec and Frensch co-operate on new products
Leading light suppliers Invertec Ltd. of Fairford, England and Frensch GmbH of Duisburg, Germany are delighted to announce their partnership for the development and manufacture of lighting systems utilising the latest technology.
Each company has over 25 years’ experience of designing lights for a wide variety of transportation needs, with particular expertise in bus & rail, marine and specialist commercial vehicle applications.
Full Story ...